Specialty Products, Inc.

2410 104th St. Ct. S. Suite D

Lakewood, Washington 98499

Ph: 1.800.627.0773

1.253.588.7101

Fax: 1.253.588.7196

Email: info@specialty-products.com

 

SPI Dallas, Texas

Ph: 1.800.810.9901

1.972.412.6622

Fax: 1.972.412.6005

 

SPI Anchorage, Alaska

Ph: 1.800.770.2449

1.907.276.7932

Fax: 1.907.279.2749

 

International Sales

Ph: 1.800.478.7473

1.253.588.7101

Email: international_sales@specialty-products.com

EPL-1™, EPL-3™ and EPL-8™(Extended Pot Life)

EPL-1 Hand Mixed, Slow-Set Polyurea Coating

concrete-joint-fill

Plural component polyurea elastomers need to be applied through heat and high pressure and don’t mix until it reaches the spray gun. The EPL (Extended Pot Life) series allows the product to be hand-mixed and applied with a brush or trowel.

Because of its slower chemistry, EPL products were designed as a patch or repair material for polyurea. EPL-1™ is a high-strength, self-leveling, semi-rigid polyurea elastomer. Because of its high tensile strength and high elongation, EPL-1™ is very resistant to deformation. This balance of physical properties makes it an ideal polymer for filling or repairing construction joints, random cracks, joint faces, and spalls. It contains propriety additives for superior adhesion to ferrous surfaces and suitable for heavy-duty traffic.

EPL-1™ is impact, abrasion, gouge and tear resistant, as well as resistance to mild acids and bases. The elastomer is cost-effective, environmental-friendly and sets fast to return to service in hour, not days. It must be processed through high-pressure or joint-filled equipment.

Recommended uses for EPL-1™ are:

  • Warehouse floors- joint filler
  • Water and waste water treatment- lining
  • Food processing facilities
  • Freezers
  • Bridge decks
  • Parking structures

 

EPL-8 Hand Mixed, Slow-Set Polyurea Coating

hand-mixed-polyurea

Plural component polyurea elastomers need to be applied through heat and high pressure and don’t mix until it reaches the spray gun. The EPL (Extended Pot Life) series allows the product to be hand-mixed and applied with a brush or trowel.

EPL-8™ is a high-elongation, self-leveling, elastomeric pure polyurea. When sprayed it acts as a high-resilient adhesive basecoat for use with pure polyurea products and polyurethane elastomers. EPL-8™ can also be applied with a brush or trowel and tack free in approximately 12 hours. It’s compliant with and U.S. Department of Agriculture (USDA) requirements for incidental food contact.

Recommended uses for EPL-8™ are:

  • Self-leveling base coat
  • Spot repair of pre-existing coatings
  • Deck repairs
  • Crack repairs
  • Hard to reach places not accessible to spray equipment
  • Control joint filler
  • Warehouse floor repairs