Specialty Products, Inc.
2410 104th St. Ct. S. Suite D
Lakewood, Washington 98499
Ph: 1.800.627.0773
1.253.588.7101
Fax: 1.253.588.7196
Email: info@specialty-products.com
SPI Dallas, Texas
Ph: 1.800.810.9901
1.972.412.6622
Fax: 1.972.412.6005
SPI Anchorage, Alaska
Ph: 1.800.770.2449
1.907.276.7932
Fax: 1.907.279.2749
International Sales
Ph: 1.800.478.7473
1.253.588.7101
Flame Seal - TB
UL-1715 Qualified Thermal & Ignition Barrier for SPF Insulation.
Today code & fire officials are requiring the use of a fire retardant thermal or ignition barrier when using SPF to insulate buildings. It’s not just about satisfying code requirements, but more importantly helping to save lives and physical property. Choosing the right fire retardant product that has proven credentials is important. Older cementitous “mud” fire barrier products are difficult to apply and need a thick unsightly layer to provide adequate flame protection.
Flame Seal Products, Inc. is pleased to introduce the first thin film paint-on thermal barrier for urethane foam
to successfully pass the UL-1715 Room Fire Test. This ultra thin layer fire retardant coating is less than half the thickness of the width of a credit card.
Flame Seal - TB™ is an intumescent fire resistant coating that expands up to 100 times its original thickness, creating a protective layer that cools the SPF surface. It’s easy to apply and provides an aesthetically pleasing form of fire protection for building and house owners. Flame Seal - TB™ ICC certification # 08-06-05 (pending).
Flame Seal - TB™:
- Economical Thermal and Ignition Barrier
- Easy to apply with paint roller or commercial airless sprayer
- No expensive application equipment needed
- Ultra-thin single coat application (25 wet mils thermal barrier – 8 wet mils ignition barrier)
- Eco-friendly, water based and No VOCs
- Non toxic and compliant with FDA/USDA for incidental food contact
- Simple equipment cleanup (hot soapy water)
Contact us today to receive official testing and certification documentation.
Foam Safe™ (Thermal Barrier)
Foam Safe ™ is a cementitious thermal barrier for Spray Polyurethane Foam (SPF) insulation. It contains asbestos-free vermiculite and has been a trusted fire resistant coating for over twenty years. Once sprayed, Foam Safe™ can be brushed, trowelled, rolled, or texturized in a wide variety of finishes.
Foam Safe™ is factory precision mixed in 18 kg (40 lbs.) bags to which potable water is added. To seal the surface or achieve a desired color use Masonry paint. It can be brushed or sprayed to the thermal barrier coating after proper curing. Foam Safe™ ICC certification (# ER-4022).
